Grand Voyager V6-3.8L VIN L (1999)
Parking Brake Cable: Service and Repair
Right Rear Cable Replacement
REMOVAL
1. Raise vehicle on jackstands or centered on a hoist.
2. Remove rear tire and wheel assembly.
3. Remove rear brake drum from the rear wheel of the vehicle requiring service to the rear park brake cable.
Locking Out Automatic Adjuster
4. Create slack in the rear parking brake cables by locking out the automatic adjuster as described here. Grasp an exposed section of front parking
brake cable near the equalizer and pull down on it. At this time install a pair of locking pliers on the cable just rearward of the second body
outrigger bracket.
Intermediate Cable Attachment To Right Rear Cable
5. Disconnect the right rear parking brake cable from the connector on the intermediate cable.
