Grand Voyager V6-3.8L VIN L (1999)
Cruise Control Servo Cable: Service and Repair
REMOVAL
1. Release hood latch and open hood.
2. Remove air cleaner resonator.
Fig. 11 Speed Control Cable End
3. Disconnect throttle and speed control cable ends from throttle body.
Speed Control Cable
4. Depress lock tabs holding speed control cable casing to cable mount bracket.
5. Remove tie wrap holding vacuum line, throttle cable, and speed control cable together.
6. Remove nuts holding speed control cable case to servo.
7. Remove cable case from servo.
8. Remove hairpin clip holding cable end to servo diaphragm.
INSTALLATION
Reverse the preceding operation.
