Grand Voyager V6-3.8L VIN L (1999)
Door Sensor/Switch (For Alarm): Service and Repair
Front Door Ajar (VTSS Trigger) Switch
REMOVAL
Negative Battery Cable
1. Disconnect and isolate the battery negative cable.
2. Open the front door.
Front Door Ajar Switch
3. Remove the screw holding the door ajar switch to the door B-pillar.
4. Remove the door ajar switch from the B-pillar.
5. Disconnect the wire connector from the back of the ajar switch and remove the switch.
INSTALLATION
For installation reverse the above procedure.
