Grand Voyager AWD V6-201 3.3L (1992)
Brake Fluid Pressure Sensor/Switch: Service and Repair
Dual Function Switch & Boost Pressure Transducer
Fig. 71 Primary Pressure Transducer
Removal of the primary pressure transducer does not require removal of the hydraulic assembly.
1. Depressurize hydraulic accumulator as outlined under "Hydraulic Assembly/Service and Repair." See: Antilock Brakes / Traction Control
Systems/Brake Fluid Accumulator/Service and Repair/Depressurizing Hydraulic Accumulator
WARNING:Failure to de-pressurize the hydraulic accumulator, may result in personal injury, or damage to painted surfaces.
2. Raise and support vehicle.
3. Disconnect dual function pressure switch and boost pressure transducer.
4. Remove dual function switch using socket tool No. 6607 or equivalent.
5. Remove boost pressure transducer using socket tool No. 6684 or equivalent.
6. Reverse procedure to install, torquing switch and transducer to 106 inch lbs.
