Grand Voyager AWD V6-201 3.3L (1992)
1.
Remove the drain tube. If the drain tube is plugged, flush it out with clean water. Modify (cut off) the drain tube as shown in Figure 2.
2.
Apply Mopar RTV Sealant (04318025) around the A/C-heater housing nipple and install the tube at the angle shown in Figure 2.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE
Labor Operation No. Modify Drain Tube
24-65-03-90
. . . . . . . . . . . .
0.2 Hrs.
Install Condensate Wall Clip
24-65-31-90
. . . . . . . . . . . .
2.4 Hrs.
FAILURE CODE: 65 Leaks