Grand Voyager AWD V6-201 3.3L (1992)
Fuel Pressure Regulator Removal And Replacement
Fuel Pressure Regulator O-rings
1.
Check that the fuel pressure regulator has two plastic spacers and that the fuel rail has two O-rings in the fuel regulator cavity.
2.
Install fuel pressure regulator into the cavity in the fuel rail.
Fuel Pressure Regulator Location
3.
Install the fuel pressure regulator retainer and retainer screw. Torque the retainer screw to 60 lb-in (7 Nm).
4.
Connect the vacuum hose to fuel pressure regulator.
5.
Connect the negative battery terminal.
Note:
ASD and fuel pump relays remain energized for 7 minutes during the following test, unless the test is stopped or the ignition switch is turned to
the OFF position.
6.
Using scan tool, place ignition switch in "RUN" position and use Actuate Output Test "Auto Shutdown (ASD) Relay", to activate fuel pump and
pressurize system.