Horizon L4-97 1.6L SOHC (1984)
Crankshaft Main Bearing Seal: Service and Repair
Fig. 15 Crankshaft rear oil seal removal
Fig. 16 Crankshaft rear oil seal installation
1.
Place inner surface of seal housing on spacers to allow clearance for seal removal.
2.
Install tool No. C-4759 or equivalent and drive seal from housing, Fig. 15. Tool No. C-4759 with universal driver C-4171 is used as both a seal
remover and, when reversed, a seal installer, Figs. 15 and 16.
3.
Place outer seal housing on a flat surface, Fig. 16.
4.
Using tool No. C-4759 with tool No. C-4171 (driver) tap seal into housing to full depth.
