Horizon L4-97 1.6L SOHC (1984)
Fig. 14 Timing mark alignment
4.
Remove crankshaft sprocket using tools C-4760 (adapter) and C-3894-A (puller) or equivalent, Fig. 13.
5.
Align crankshaft sprocket with key and drive firmly onto crankshaft.
6.
Loosely install camshaft sprocket onto camshaft.
7.
Rotate crankshaft and camshaft until timing marks on both sprockets are on a line passing through crankshaft and camshaft center lines, Fig. 14.
8.
Remove camshaft sprocket without disturbing timing marks, then reinstall sprocket and timing chain making sure marks are aligned as described
previously.
9.
Install camshaft sprocket bolts and torque to 113 inch lbs.
10.
Reverse remainder of procedure to assemble.
