plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

ABOUT US
ATE Dual Pin Floating Caliper Disc Brake (Front)|Page 1403 > < ATE Dual Pin Floating Caliper Disc Brake (Front)|Page 1401

Horizon/TC3 L4-105 1720cc 1.7L SOHC VIN A 2-bbl (1982)

Page 2
background image

Fig. 10 Guide pin bushing installation

GUIDE PIN BUSHING, REPLACE

1.  Remove bushings from caliper with a suitable tool. Discard bushings and Teflon sleeves.
2.  Remove Teflon sleeves from new bushings prior to bushing installation.
3.  Compress bushing flange with fingers and push bushing into seated position.
4.  Install Teflon sleeves into bushings.

ATE Dual Pin Floating Caliper Disc Brake (Front)|Page 1403 > < ATE Dual Pin Floating Caliper Disc Brake (Front)|Page 1401