Horizon/TC3 L4-105 1720cc 1.7L SOHC VIN A 2-bbl (1982)
Fig. 5 Circlips Exposed. Early 1982 Models Less A412 Manual Transaxle
Fig. 6 Compressing Circlip. Early 1982 Models Less A412 Manual Transaxle
Fig. 7 Circlip Installation. Early 1982 Models Less A412 Manual Transaxle
1982 - 83 MODELS W/A412 MANUAL TRANSAXLE
REMOVAL
1. Remove hub nut as outlined under "Steering Knuckle, Replace" procedure.
2. Remove clamp bolt securing ball joint stud into steering knuckle.
3. Separate ball joint stud from steering knuckle.
4. Separate outer C/V joint splined shaft from hub while moving knuckle/hub assembly away from C/V joint. The separated outer joint and shaft
must be supported during inner joint separation from transaxle drive flange. Secure assembly to control arm during next step. Also, the grease
