Laser L4-1997cc 2.0L DOHC (1990)
Headliner: Customer Interest
Headliner Molding - Warpage
Models
1990 BD Bodies
Subject
Headliner Molding Warpage
Index
BODY AND SHEET METAL
Date
March 26, 1990
No.
23-06-90
P-0862 (C23-33-0)
BODY CODE LEGEND
BD - LASER
SYMPTOM/CONDITION
Some Laser/Talon models, built prior to December 1, 1989, may exhibit headliner molding warpage at the front edge of the headliner in vehicles
subjected to high ambient temperatures. A new molding and revised installation procedure have been developed to ease installation.
PARTS REQUIRED
1
Headliner Front Molding-Gray
PN MB 828045
1
Headliner Front Molding-Beige
PN MB 828046
1
Headliner Front Molding-Lt.Gray
PN MB 828047
REPAIR PROCEDURE:
1.
Carefully release the A-pillar moldings by pulling out on the molding at the junction of the A-pillar and roof panel. This will allow the molding to
be pulled out from under the B-pillar molding. Do not remove the Apillar molding from the lower end of the A-pillar.
2.
To remove the headliner molding, start at either end and pull it off the roof flange.
Figure 1
