plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Rear Quarter Trim Panel - Loose|Page 3480 > < Rear Quarter Trim Panel - Loose
Page 1
background image

Trim Panel: Customer Interest
Rear Quarter Trim Panel - Loose

NO.: 23-05-91

GROUP:

BODY

DATE:

June 3, 1991

SUEJECT:

Loose Rear Quarter Trim Panel

MODELS:
1990 - 1991  (BD) LASER

SYMPTOM/CONDITION:

Some of the subject vehicles may have loose interior quarter trim panel(s) due to a loose or missing trim clip at the top outboard position of the panel(s).
The current available trim clip does not fully seat through the hole in the sheet metal and can work its way out of position. A revised trim clip is now
available in either gray or brown.

PARTS REQUIRED:

2

Clip, Trim

MB692976 (Gray)
MB692977 (Brown)

REPAIR PROCEDURE:

This procedure involves replacing the loose or missing trim clip from the left and right interior quarter trim panels with a revised clip.

1.

Push down on the center shaft of the trim clip to disengage the locking tabs. Remove the existing trim clip from the location as shown below.
Repeat the process on the opposite side.

2.

Install the new trim clips by pushing firmly on the clip to seat it.

POLICY:

Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No. 23-02-55-90

. . . . . . . . . .

0.2 Hrs.

FAILURE CODE: ox - Wrong part

Rear Quarter Trim Panel - Loose|Page 3480 > < Rear Quarter Trim Panel - Loose