Laser AWD L4-1997cc 2.0L DOHC Turbo (1992)
B15. Install the upper and lower timing belt covers as shown in Figure 2.
Note that timing cover bolts vary in length. Make sure that the proper size bolts (Figure 2) are installed in the correct hole locations.
B16. Install crankshaft pulley and torque to 25 +/- 5 N-m (18 +/- 4 ft.lbs.).
B17. Install A/C tensioner bracket with A/C belt and torque to 25 +/- 2 N-m (18 +/- 4 ft.lbs.). Adjust belt tension to 5.5-6.0 mm (.220-.240 in.) belt
deflection.
B18. Install water pump pulley.
B19. Install alternator/water pump and power steering drive belts and adjust belt tension as follows:
Belt Deflection
Alternator/Water Pump Belt
9.0-11.5 mm (.354-.453 in.)
Power Steering Belt
6.0-9.0 mm (.240-.354 in.)
B20. Install left front engine mount and bracket and torque to the specifications shown in Figure 1.
B21. Remove engine support fixture.
