plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Valve Body, A/T|Removal and Installation|Page 3569 > < Valve Body, A/T|Description and Operation
Page 1
background image

Valve Body: Service and Repair
Removal and Installation

DISASSEMBLY

1. Drain ATF.
2. Remove oil pan.
3. Remove the oil filter.
4. Remove the oil temperature sensor.
5. Press the tabs of the solenoid valve harness grommet, and then push into the case and remove.
6. Remove valve body assembly. Be careful not to drop the manual valve.

Valve Body, A/T|Removal and Installation|Page 3569 > < Valve Body, A/T|Description and Operation