plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Limited Slip|Page 3613 > < Limited Slip|Page 3611
Page 1
background image

Differential Carrier: Service and Repair
Differential Carrier Replacement

Fig. 9  Exploded View Of Exhaust System

Fig. 10  Differential Carrier Removal

REMOVAL

1. Remove driveshafts, refer to Transmission and Drivetrain/Drive/Propeller Shafts, Bearings and Joints/Service and Repair.
2. Position a suitable jack under rear axle assembly, then drain differential gear oil.
3. Remove center exhaust pipe as shown.
4. Scribe mating marks on differential companion flange and flange yoke for assembly reference.
5. Remove differential to propeller shaft connection, then support propeller shaft with wire.
6. Remove dynamic damper to differential support member bolts.
7. Remove differential support member bolts, then the carrier.

Limited Slip|Page 3613 > < Limited Slip|Page 3611