Laser FWD L4-1997cc 2.0L DOHC (1992)
Antitheft and Alarm Systems: Testing and Inspection
Theft Alarm System
1. Connect a voltmeter between terminal "A" and the ground terminal of the data link connector.
When Using A Voltmeter
2. Make sure that when the following switches are turned on, the output shown in the illustration is delivered.
-
Key reminder switch
-
Hood switch
-
Door switch
-
Door lock actuator switch
-
Door and Liftgate key cylinder switch
-
Liftgate switch
If there is no output of a voltage pattern at all, check for a malfunction of that switch or for damaged or disconnected wiring.