Laser FWD L4-1997cc 2.0L DOHC (1992)
Brake Caliper: Service and Repair
Removal and Installation
On models equipped with anti-lock brakes, prior to disconnecting any hydraulic lines or fittings the hydraulic system must be depressurized by
pumping the brake pedal a minimum of 25 times with ignition Off.
1.
Raise and support vehicle, then remove wheel and tire assembly.
2.
Disconnect brake hose at caliper strut, then at the brake caliper.
3.
Remove support mounting to steering knuckle attaching bolts, then the front brake assembly.
4.
Remove brake pads, then separate caliper body from support mounting.
5.
Reverse procedure to install.
