Laser FWD L4-1997cc 2.0L DOHC (1992)
the positions as shown in Fig. 68.
2.
When installing camshaft bearing caps, tighten evenly, in two or three steps.
Fig. 69 Installing Camshaft Oil Seal.
3.
When installing camshaft oil seal, use oil seal guide tool No. MD998307 and oil seal installation tool No. MD998306 or equivalents as shown,
Fig. 69.
4.
Install crank angle sensor as follows:
a. Ensure mating mark on housing of crank angle sensor is aligned with notch in plate.
b. Ensure crank angle sensor does not move when tightening attaching nut.
Fig. 23 Installing Rocker Cover.
5.
When installing semi-circular packing, apply liberal amount of gasket sealant onto circumference of packing.
6.
When installing rocker cover, apply gasket sealant to area as shown in Fig. 23.
