Laser FWD L4-1997cc 2.0L DOHC (1992)
5.
Install the provided timing belt over the intake side camshaft sprocket and clamp it in position with a clip (Figure 9).
6.
Install the timing belt over the exhaust side sprocket, aligning the timing marks as shown in Figure 3 (two wrenches may be required) and clamp
the belt in position with a clip (Figures 10 & 11).
7.
Position the timing belt around the idler pulley, oil pump sprocket, crankshaft sprocket and tensioner pulley (in that order) as shown in Figure 12.
