Laser FWD L4-1997cc 2.0L DOHC (1992)
Air Flow Meter/Sensor: Service and Repair
REMOVAL
1.
Ensure that the ignition switch is in the OFF position, and disconnect the battery.
Air Flow Sensor Connector Location
2.
Remove the air flow sensor connector, on the air filter housing lid.
Air Flow Sensor Location
3.
Release the clips holding the lid to the air filter housing.
4.
Remove the lid with the air flow sensor attached.
5.
Locate and remove the attachment bolts (to the lid) and remove the air flow sensor.
INSTALLATION
1.
Attach the air flow sensor to the air filter housing lid.
2.
Install the lid on the air filter housing.
3.
Connect the air flow sensor connector.
4.
Connect the battery.
