plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Idle Position Switch <--> [Idle Speed Motor Position Sensor] > < Fuel Gauge Sender|Testing and Inspection
Page 1
background image

Rollover/Pressure Relief Valve: Service and Repair

REMOVAL

1.

Remove the bolt mounting the fuel check valve on the firewall.

2.

Remove the hose attaching clamps and disconnect the hose from the check valve.

INSTALLATION

1.

Inspect fuel hoses for cracking and checking. Replace as necessary.

2.

Reconnect the hoses and securely tighten the hose clamps.

3.

Securely tighten the valve mounting bolt.

Idle Position Switch <--> [Idle Speed Motor Position Sensor] > < Fuel Gauge Sender|Testing and Inspection