Laser FWD L4-1997cc 2.0L DOHC Turbo (1993)
Wheel Speed Sensor: Service and Repair
FRONT
1.
Raise and support vehicle.
2.
Remove front speed sensor rotors, and speed sensor attaching clips.
3.
Remove front speed sensor and bracket.
4.
Reverse procedure to install, noting the following:
a. Clearance between speed sensor rotor and pole piece should be 0.012--0.035 inch.
REAR
1.
Raise and support vehicle.
2.
Remove rear speed sensor rotor, and speed sensor attaching clips.
3.
Remove rear speed sensor.
4.
Reverse procedure to install, noting the following:
a. Clearance between speed sensor rotor and pole piece should be 0.008--0.028 inch.
