Laser FWD L4-1997cc 2.0L DOHC Turbo (1993)
Refrigerant Oil: Service and Repair
Oil Charge Additions
W/ FX105V Compressor
Before installing replacement compressor, drain oil from replacement and failed compressors (drain oil from suction port). Add same amount of oil to
replacement compressor as drained from failed compressor.
When other air conditioning system components are replaced add the following quantities of 500 viscosity refrigerant oil:
-
Evaporator ................................................................................................................................................................................................... 2.4 ounces
-
Condenser ..................................................................................................................................................................................................... 0.3 ounce
-
Receiver-Drier .............................................................................................................................................................................................. 0.2 ounce
-
Piping ............................................................................................................................................................................................................ 0.3 ounce
W/ FX105VS Compressor
Before installing replacement compressor, drain oil from replacement and failed compressors (drain oil from suction port). Add same amount of oil to
replacement compressor as drained from failed compressor.
When other air conditioning system components are replaced add the following quantities of 500 viscosity refrigerant oil:
-
Evaporator ................................................................................................................................................................................................... 2.4 ounces
-
Condenser ..................................................................................................................................................................................................... 0.3 ounce
-
Receiver-Drier .............................................................................................................................................................................................. 0.2 ounce
-
Piping ............................................................................................................................................................................................................ 0.3 ounce
W/ 10PA17 Compressor
When replacing system components, add the following quantities of refrigerant oil:
-
Compressor ...................................................................................................................................................................................................... 1 ounce
-
Condenser ..................................................................................................................................................................................................... 0.7 ounce
-
Evaporator ....................................................................................................................................................................................................... 1 ounce
-
Line ............................................................................................................................................................................................................... 0.3 ounce
-
Receiver/Drier .............................................................................................................................................................................................. 0.3 ounce
