plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3285 > < Initial Inspection and Diagnostic Overview|Page 3283
Page 1
background image

Fuel Injector: Scan Tool Testing and Procedures

Notes:

-

The injector activation time indicates the time under the following conditions: a power source voltage of 11V and a cranking rpm of 250 rpm
or less.

-

Simultaneous injection at four cylinders when engine coolant temperature is 0°C (32°F).

-

The injector activation time may be about 10% longer than indicated above when the vehicle is new [driven approximately 500 km (300 miles)
or less].

Initial Inspection and Diagnostic Overview|Page 3285 > < Initial Inspection and Diagnostic Overview|Page 3283