Laser FWD L4-1997cc 2.0L DOHC Turbo (1993)
4. Turn the key to the ON position.
5. Check the output voltage.
Voltage
0.48 - 0.52 volts
If the voltage is not as specified, adjust the TPS by loosening the mounting screws and rotating the sensor.
Note: Clockwise rotation of the sensor increases the voltage output while counter-clockwise rotation reduces voltage.
6. Tighten the sensor set screws securely.
Torque Spec
1.1 - 1.8 ft lb (1.5 - 2.5 Nm)
7. Turn the ignition switch OFF.
8. Disconnect the battery for at least ten seconds to clear any stored trouble codes.
9. If the throttle cable was previously loosened, return the cable to the proper adjustment.
