plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Harness Inspection|Page 2075 > < Harness Inspection|Page 2073
Page 2
background image

Voltage:
4.5 - 4.9 Volts.

6. Check for continuity of the ground circuit of the Vehicle Speed Sensor, between the harness connector terminal 2 and ground. 

Continuity:
Should exist

If any of the previous tests produce unsatisfactory results, the harness will need to be repaired or replaced. Once repairs have been completed,
clear the trouble codes and road test the vehicle to confirm that the repair has corrected the problem and the code doesn't return.
If the same trouble code reoccurs, it is possible that there is an intermittent failure of the component or the ECM. Check for looseness at all
harness junctions and test for an intermittent failure.

Harness Inspection|Page 2075 > < Harness Inspection|Page 2073