plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

ABOUT US
Idle Position Switch <--> [Idle Speed Motor Position Sensor] > < Component Tests and General Diagnostics|Page 2129

Laser FWD L4-1997cc 2.0L DOHC Turbo (1993)

Page 1
background image

Mass Airflow Sensor: Service and Repair

Air Flow Sensor Connector Location

Removal

1. Ensure that the ignition switch is in the OFF position, and disconnect the battery.
2. Remove the air flow sensor connector, on the air filter housing lid.

Air Flow Sensor Location

3. Release the clips holding the lid to the air filter housing.
4. Remove the lid with the air flow sensor attached.
5. Locate and remove the attachment bolts (to the lid) and remove the air flow sensor.

Installation

1. Attach the air flow sensor to the air filter housing lid.
2. Install the lid on the air filter housing.
3. Connect the air flow sensor connector.
4. Connect the battery.

Idle Position Switch <--> [Idle Speed Motor Position Sensor] > < Component Tests and General Diagnostics|Page 2129