plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Window Regulator|Service and Repair > < Door Glass - Hard To Roll Up
Page 2
background image

11.

Loosen the four bolts attaching the regulator to the door.

12.

Pull the glass toward the back of the door (do not push the glass downward).

13.

While holding the glass in place, tighten the four bolts and verify repair.

REGULATOR TO DOOR ADJUSTMENT - PASSENGER (RIGHT) SIDE DOOR:

14.

Loosen the four bolts attaching the regulator to the door.

15.

Roll the window up and down 3 to 4 times. On the last time up, stop three inches from the top.

16.

Tighten the four bolts and verify the repair.

SHIMMING OF THE REGULATOR - ONLY IF PREVIOUS REPAIRS DID NOT CORRECT CONDITION:

17.

Remove the lower regulator to door mounting bolts.

18.

Install a standard thickness washer (approximately 1/16") between the regulator and the door.

19.

Install the bolts and verify repair.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE
Labor Operation No.

23-34-10-95

0.6 Hrs.

FAILURE CODE: 50 - Improper Adjustment

Window Regulator|Service and Repair > < Door Glass - Hard To Roll Up