Neon L4-2.0L DOHC (1996)
Fig. 69 Camshaft Bearing Caps
3. Install camshaft bearing cap attaching bolts in sequence shown in Fig.69, one camshaft at a time. Tighten to specifications.
4. Use camshaft sprocket holder and adapter tools No. C-4687 and C-4687-1, or equivalents, to ensure camshaft sprockets do not turn during
installation.
Fig. 71 Cylinder Head Cover Installation
5. Install cylinder head cover assembly to head and tighten in sequence shown in Fig.71.
Torque in three steps:
First to 3.3 ft.-lbs.,
Then to 6.6 ft.-lbs.,
Finally to 8.9 ft.-lbs.