Neon L4-2.0L DOHC (1996)
6. Reach in and disconnect the wiring connector(s) for the rear window defogger and/or fog lamp switch(s) as required.
7. If equipped with RKE, remove the two screws retaining the module and lay over the instrument cluster.
8. Gently pull on the center A/C outlet duct to remove.
9. Remove three attaching screws at corners of the control, two front retaining and one retaining from the top rear.
10. Pull the control rearward and disconnect the wiring connector.
11. Using a screwdriver, disengage the cable attachment clips.
INSTALLATION
1. For installation, reverse the above procedures.
