Neon L4-2.0L DOHC (1996)
Fuel Gauge Sender: Service and Repair
Fig. 21 Fuel Pump/Level Sensor Electrical Connector
NOTE: Remove fuel pump module prior to beginning this procedure.
REMOVAL
1. Depress retaining tab and remove the fuel pump/level sensor connector from the bottom of the fuel pump module electrical connector.
Fig. 22 Wire Terminal Locking Wedge
2. Pull off blue locking wedge.
Fig. 23 Wire Terminal Locking Finger
3. Using a small screwdriver lift locking finger away from terminal and push terminal out of connector.