plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Map Light > < Ground Circuit|Page 6211
Page 1
background image

License Plate Lamp: Testing and Inspection

-

Check for a blown 40 Amp fuse in the PDC.

-

Check for a blown fuse in cavity 2 of the fuse block

-

For the left rear parking lamp, turn signal, side marker lamp, and the rear license plate the Z1 circuit grounding point is in the left rear wheel well.

-

For the right rear parking lamp, turn signal and side marker lamp, the Z1 circuit grounding point is in the right rear wheel well.

-

Circuit L7 also feeds the radio, if equipped.

-

When the headlamp switch is in the PARK or ON position, the dimmer circuit, F33, connects to circuit E1. Circuit E1 powers the ash receiver
lamp, transmission range indicator lamp, instrument panel cluster illumination lamps, HVAC control lamp, heated rear window lamp, and radio
lamp. A 4 Amp fuse, in cavity 12 of the fuse block, protects circuit E1.

Map Light > < Ground Circuit|Page 6211