Neon L4-2.0L DOHC (1996)
Transmission Position Switch/Sensor: Service and Repair
Park/Neutral Starting and Back-Up Lamp Switch
Removal
1. Place a suitable container under the switch to catch fluid when switch is removed.
2. Unscrew switch from transaxle case allowing fluid to drain into container.
3. Move selector lever to PARK, then NEUTRAL position and inspect to see the switch operating lever fingers are centered in the switch opening.
Installation
1. Crew the switch with a new seal into the transaxle case and tighten to 33 Nm (24 ft. lbs.).
2. Test switch with a test lamp.
3. Add fluid to transaxle to bring up to proper level.