Neon L4-2.0L DOHC (1996)
Fig 8 Attaching Screws At Front Of Center Console
4. Remove the two screws located in cup holders, attaching front of center console assembly to console bracket.
5. Raise park brake hand lever assembly as high as it will go for required clearance to remove center console.
6. Remove center console assembly from vehicle.
WARNING: When repairs to the park brake hand lever assembly or cables is required, the auto adjuster must be reloaded and locked
out.
7. Lower park brake lever handle.
Fig 9 Locking Pin Installed In Park Brake Mechanism
8. Grasp park brake lever output cable by hand and pull upward.
-
Continue pulling on cable until a 3/16 in. drill bit can be inserted into handle and sector gear of park brake mechanism.
-
This will lock the park brake mechanism and take tension off park brake cables.
Fig 10 Removing Park Brake Cables From Equalizer
