Neon L4-2.0L DOHC (1996)
Seat Belt: Service and Repair
FRONT OUTBOARD SEAT BELT
Removal
1. Slide lower seat belt anchor cover upward to expose bolt.
Front Outboard Seat Belt Anchor
2. Remove bolt holding lower anchor bolt to floor below door sill.
3. Separate lower anchor from floor.
4. Remove rear seat cushion and back.
5. Remove quarter trim panel.
6. Guide seat belt webbing through slot in quarter trim panel.
7. Disengage wire connector from seat belt retractor.
Front Outboard Seat Belt Retractor
8. Remove bolts holding seat belt retractor to B-pillar.
9. Separate seat belt retractor from vehicle.
Installation
Reverse the preceding operation. Tighten seat belt anchor bolt to 39 Nm (29 ft. lbs.).
FRONT SEAT BELT BUCKLE
1. Move front seat to the forward position.
2. Remove bolt holding seat belt buckle to seat.
3. Separate seat belt buckle from scat.
4. Reverse the preceding operation for installation.