Neon L4-2.0L DOHC (1996)
Starter Motor: Service and Repair
With A/C
Fig. 6 Remove And Install Battery Cables
STARTER REMOVAL
1. Disconnect battery negative cable.
2. Raise vehicle.
3. Using a floor jack or jack stand, support the engine and transmission assembly so they will not rotate.
Fig. 12 Front Engine Mount Bolt Removal
4. Remove the front engine mount through bolt from the insulator and front crossmember mounting bracket.
5. Lower engine to rotate it forward to allow easy removal of starter motor.
6. For easier servicing, do not remove the wiring from starter at this time.
Fig. 13 Starter Removal