Neon L4-2.0L DOHC (1996)
Steering Wheel: Service and Repair
1. Disconnect battery ground cable.
2. Place front wheels straight forward.
3. Rotate steering wheel 180° clockwise.
4. Lock steering with column lock cylinder.
5. Remove speed control switch and connector.
6. Remove air bag module attaching bolts from rear of steering wheel.
7. Lift module and disconnect wiring.
8. Remove steering wheel retaining nut and vibration damper if equipped.
9. With appropriate tool, remove steering wheel while avoiding damage to clockspring wiring.
10. Reverse procedure to install, noting the following:
a. Install steering wheel ensuring flats on hub align with clockspring.
b. Torque steering wheel mounting nut to 45 ft.-lbs.
