plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Band, A/T > < Torque Converter Clutch Solenoid, A/T|Locations|Page 3712
Page 1
background image

Torque Converter Clutch Solenoid: Testing and Inspection

Circuit F12 splices to feed the ABS control module, PCM, EGR solenoid, leak detection pump, and the duty cycle EVAP/Purge solenoid. The F12
circuit also connects to a bus bar in the Power Distribution Center (PDC) that supplies voltage to the coil side of radiator fan relay, A/C clutch relay, and
fuel pump relay.

In the RUN or START position, the ignition switch connects circuit A1 from the fuse block and circuit A21. Circuit A1 connects to battery voltage and
is protected by a 30 Amp fuse in the PDC.

Band, A/T > < Torque Converter Clutch Solenoid, A/T|Locations|Page 3712