Neon L4-2.0L DOHC (1996)
Shift Interlock Cable: Adjustments
1. Disconnect battery ground cable, then remove console assembly.
2. Remove gearshift knob set screw and knob.
3. Remove gearshift indicator bezel and indicator lamp, then install gearshift knob.
4. Place shifter in Park position.
5. Place ignition in Lock or Accessory position. If cable is out of adjustment, then grasp slug on interlock cable with a suitable pair of pliers and pull
back on cable. This will allow ignition to be placed in position.
6. Ensure interlock cable is completely seated into shifter interlock lever, then ensure ignition is in Lock or Accessory position.
7. Pry up adjuster lock on interlock cable. Spring on interlock cable should automatically adjust for slack in cable.
8. Snap interlock cable adjuster lock onto cable.
9. Remove gearshift knob set screw and knob.
10. Install indicator lamp, gearshift bezel and gearshift knob.
11. Connect battery ground cable.
