Neon L4-2.0L SOHC (1995)
Tail Lamp: Description and Operation
Tail Lamps and Rear License Plate Lamp
TAIL LAMPS AND REAR LICENSE PLATE LAMP
Circuit A3 in the Power Distribution Center (PDC) connects to a bus bar in the fuse block. One of the four circuits powered by the bus bar is
circuit F33. Circuit F33 connects to cavity 4 of the headlamp switch. A 40 amp maxi fuse in the PDC protects the A3 circuit. A 15 amp fuse, in
cavity 2 of the fuse block, protects the F33 circuit.
The headlamp switch has three positions: ON, PARK (tail lamps) and OFF, plus a dimmer switch. When the headlamp switch is in the PARK or
ON position, it connects circuit F33 to circuit L7. From the headlamp switch, circuit L7 branches to power the front parking lamps, rear tail lamps,
side marker lamps, and rear license plate lamp.