plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

EVAP Purge Solenoid Inspection|Page 4945 > < EVAP Purge Solenoid Inspection
Page 1
background image

Canister Purge Solenoid: Testing and Inspection
Helpful Information

Circuit F18 splices to feed the ABS control module, PCM, EET solenoid and the TCC solenoid. The F18 circuit also connects to a bus bar in the Power
Distribution Center (PDC) that supplies voltage to the coil side of radiator fan relay, A/C clutch relay, and fuel pump relay.

In the START or RUN position, the ignition switch connects circuit A1 from the fuse block and circuit A21. Circuit A1 connects to battery voltage and
is protected by a 30 amp fuse in the PDC.

EVAP Purge Solenoid Inspection|Page 4945 > < EVAP Purge Solenoid Inspection