Neon L4-2.0L SOHC (1995)
Powertrain Control Module: Recalls
Recall - Powertrain Control module
ATTN: Service Managers
Subject:
SAFETY RECALL # 614 -- POWERTRAIN CONTROL MODULE (PCM)
Involved Vehicles:
1995 Plymouth/Dodge Neon Vehicles Built Through February 1, 1994, (MDH 02-01-XX)
Reference: DMAIL message of February 4, 1994, Safety Recall # 614
We are now advising you that the necessary parts, instructions and vehicle lists are in the process of being distributed.
Parts are being shipped directly to dealers by UPS and Federal Express (next day air) from the National Parts Depot. Shipments should be completed by
Monday, February 14, 1994.
Each package will include a powertrain control module (PCM), two PCM mounting screws, a positive battery cable clamp bolt/stud, four rear brake flex
hose bracket mounting screws and an emission label (VECI), if required. Instruction sheets are also included.
Based on our records, we will ship the proper mix of four different parts packages that are required based on emission/transaxle application.
In order to expedite distribution, some dealers may receive more than one parts shipment.
VIN LISTINGS:
Each dealer will receive the instruction sheets and a list of all involved vehicles by U.S. Priority Mail by February 12, 1994. The list includes a single
digit code, located in the third column (column headed "P") to identify which of the four parts packages are required for each VIN listed. Part code:
1=C3906141, 2=C3906142, 3=C3906143 and 4=C3906144.
Available parts should be used to fix customer vehicles first, then your stock vehicles.
As previously described, you should have picked up any sold vehicles and provided equivalent or better alternate transportation. If for some reason this
has not yet been done, dealers are to contact owners immediately by phone and arrange for this service. Upon completion of the repairs, THE VEHICLE
MUST BE WASHED, FILLED WITH GAS AND DELIVERED BACK TO THE OWNER.
REIMBURSEMENT:
The parts package will be invoiced to dealers at $210 each, which can then be marked up and placed on the claim following the normal recall
procedures.
Use Labor Operation No. 08614182 at 0.5 hours to cover repairs to the vehicle.
On Sold Vehicles:
Submit a separate claim and use Labor Operation No. 95051950 to cover:
-
Pick up and delivery of the vehicle
-
Loaner Expense
-
Wash
-
Gas for the actual expense incurred.
Parts return is not required and the removed parts must be immediately scrapped.
If you are requested to service a vehicle that you did not sell, please contact your Zone Service Office for assistance.
PRODUCTION STATUS:
Vehicles built after February 1, 1994 (MDH 02-01-XX) will have already been upgraded at the assembly plant.
Normal production at Belvedere is expected to resume early next week.
ADDITIONAL INFORMATION TO FOLLOW:
The normal recall notification instructions will be sent to dealers in the near future.
Letters will not be mailed to owners at this time. We will mail to those owners who are not completed by dealer contact in the near future.
If you have any questions regarding this action, please contact your Zone Service Office.
PARTS PACKAGE C3906141, C3906142, C3906143, C3906144 SAFETY RECALL # 614 - Powertrain Control Module (PCM)
