Neon L4-2.0L SOHC (1995)
2.
Perform the Relearn - Cam/Crank Alignment Procedure. Using the DRB III, select Engine, select Misc., then select Option # 5 - Relearn -
Cam/Crank.
NOTE:
THE FOLLOWING STEP APPLIES TO VEHICLES EQUIPPED WITH A MANUAL TRANSAXLE AND BUILT PRIOR TO JAN. 28, 1994
(MDH 01-28-XX).
3.
Remove Crankshaft Position Sensor, outlined on page 8D - 13 in the 1995 Neon Service Manual (Publication No. 81-270-5025). Replace it with
P/N 5235377.
4.
Type the required information on the Authorized Modification Label (as illustrated), and attach near the VECI Label.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
Powertrain Control Module (MTX/ATX)
08-19-01-95
0.4 Hrs.
Crank Position Sensor (MTX)
08-15-80-91
0.2 Hrs.
FAILURE CODE: AM - Authorized Modification