Neon L4-2.0L SOHC (1995)
Headlamp Switch: Description and Operation
Headlamp Switch In ON Position
HEADLAMP SWITCH IN ON POSITION
When the headlamp switch is in the ON position, the A3 circuit from the Power Distribution Center (PDC) connects to circuit L2. Circuit L2
connects to the multi-function switch and feeds the L4 circuit (for low-beam operation). The L4 circuit connects to a bus bar in the fuse block.
Circuits L43 and L44 connect to the bus bar in the fuse block, and power the low-beam headlamps. Circuit L43 supplies current to the left
headlamp. Circuit L44 supplies current to the right headlamp. The L43 and L44 circuits each have separate 10 amp fuses located in fuse block.
Fuse 17 protects circuit L43, and fuse 18 protects circuit L44.
When the operator selects high-beam operation with the turn signal stalk of the multi-function switch, circuit L2 connects to the L3 circuit. Circuit
L3 powers high-beam operation.
