plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Steering Column - Clicking Noise When Turning|Page 8023 > < Key Reminder Switch|Description and Operation
Page 1
background image

Steering Column Lock: All Technical Service Bulletins
Steering Column - Clicking Noise When Turning

NO: 19-05-94

GROUP: Steering

DATE: May 20, 1994

SUBJECT:
Clicking Noise In Steering Column

MODELS:

1995 (PL) Neon

NOTE:

THIS BULLETIN APPLIES TO VEHICLES BUILT PRIOR TO 3/22/94, (MDH 03-22-XX).

SYMPTOM/CONDITION:

Clicking noise in upper steering column area when turning steering wheel.

PARTS REQUIRED:

1

4202151

Shim

REPAIR PROCEDURE:

This bulletin involves installing a shim under the rear boss of the steering column lock housing.

1.

Remove the upper and lower column shrouds as outlined in the 1995 Neon Service Manual (Publication No. 81-270-5025, Page 19-37). Remove
the screws in the turn signal and wiper switch and set the switches aside to gain access to the lock housing safety screws.

2.

Loosen the two safety screws which secure the lock housing to the column jacket using a # 27 Torx bit. Do not remove the screws. Refer to Figure
1.

Steering Column - Clicking Noise When Turning|Page 8023 > < Key Reminder Switch|Description and Operation