plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Band, A/T > < Torque Converter Clutch Solenoid Operation|Page 6091
Page 1
background image

Torque Converter Clutch Solenoid: Testing and Inspection

Circuit F18 splices to feed the ABS control module, Powertrain Control Module (PCM), EGR solenoid and the duty cycle EVAP/Purge solenoid. The
F18 circuit also connects to a bus bar in the Power Distribution Center (PDC) that supplies voltage to the coil side of radiator fan relay, A/C clutch relay,
and fuel pump relay.

In the RUN or START position, the ignition switch connects circuit A1 from the fuse block and circuit A21. Circuit A1 connects to battery voltage and
is protected by a 30 amp fuse in the PDC.

Band, A/T > < Torque Converter Clutch Solenoid Operation|Page 6091