Neon L4-2.0L SOHC (1995)
Window Track: Service and Repair
FRONT VERTICAL GUIDE BAR
1. Remove door trim panel and water shield.
2. Remove door speaker, if equipped.
3. Remove front lift guide.
4. Remove bolt holding top of front guide bar to inner door panel.
Front Vertical Guide Bar
5. Using a Snap-on (R) flare-nut socket (FRXM1O) and a hex wrench, remove nut holding bottom of guide bar to door panel while holding jack
screws.
Front Guide
6. Remove front vertical guide bar through speaker hole in inner door panel.
7. Reverse the preceding operation for installation. Verify door glass alignment, adjust if necessary.
REAR VERTICAL GUIDE BAR
1. Remove door trim panel and water shield.
2. Remove nut holding top of rear guide bar to inner door panel.
3. Using a Snap-on (R) flare-nut socket (FRXM1O) and a hex wrench, remove nut holding bottom of guide bar to door panel while holding jack
screws.