Neon L4-2.0L VIN C (1997)
Proportioning Valve Location On Hydraulic Control Unit
9. Remove the chassis brake tubes from the proportioning valves and outlet ports of the (HCU).
10. Raise vehicle.
Hydraulic Control Unit Mounting Bracket
11. Loosen and remove the 2 bolts attaching the HCU mounting bracket to the side of the front frame rail.
12. Lower vehicle.
13. Loosen and remove the bolts attaching the HCU mounting bracket to the top of the frame rail.
14. Remove HCU and its mounting bracket as an assembly from the vehicle.
Installation
PROCEDURE
Hydraulic Control Unit Mounting Bracket
1. Install the Hydraulic Control Unit (HCU) and mounting bracket as an assembly, on left front frame rail of the vehicle, aligning tabs on mounting
bracket with holes in frame rail.
