Neon L4-2.0L VIN C (1997)
Caliper Assembly Guide Pin Bolts
Caliper Removal/Installation
Storing Caliper
REMOVAL
1. Raise vehicle on jackstands or centered on a hoist.
2. Remove rear wheel and tire assemblies from vehicle.
3. Remove the 2 caliper assembly to adapter guide pin bolts.
4. Remove caliper assembly from adapter and rotor by first rotating top of caliper assembly away from adapter, and then lifting caliper assembly off
lower machined abutment on adapter.
5. Support caliper assembly firmly from rear strut to prevent weight of caliper from damaging the flexible brake hose.
