Neon L4-2.0L VIN C (1997)
Master Cylinder Mounting To Vacuum Booster
5. Remove the 2 nuts attaching master cylinder to power brake booster unit.
6. Slide master cylinder assembly straight out, and away from power brake booster unit.
Electrical Connections To HCU And Relay Box
7. Disconnect the 6 way connector from the Hydraulic Control Unit (HCU) wiring harness and 10 way connector from the relay box located on the
HCU.
Primary And Secondary Brake Tubes From Master Cylinder To HCU
8. Remove the primary and secondary master cylinder brake tubes from the HCU.